Viton Rubber Sheet

Home » Products » Rubber Sheet » Viton Rubber Sheet
Viton Rubber Sheet

Viton rubber sheet can provide extraordinary levels of resistance to chemicals, oil and heat. The highest temperature Viton can resistant is up to 300 C. The thickness is from 0.8mm to 50mm and the width is0.5m to 2m, any length. Viton rubber sheet is available in black, green, etc.

Viton rubber sheet has many uses including gasket making, roll covers, baffles and bumper strips.

Typical Physical Properties and Values
Hardness, Shore A: 75
Specific Gravity (DENSITY): 1.9g/cm3
Tensile Strength: 6mpa
Elongation Break: 150%
Compression Set Maximum: 20%
Heat Aging: (70 Cx72hours)
Tensile Strength Change: 10%
Elongation Break: 15%
Hardness Change: 10%

We can produce other specifications per your request.

We is an experienced Viton rubber sheet manufacturer based in China. We also provide rubber sheet, silicone rubber sheet, PVC edge trim seal, silicone extrusion profile, coextrusion door seal rubber extrusion, and rubber extrusion, among others. We welcome you to visit our page of rubber sheet.

Feedback Form
Other Products
  • Rubber Sheet Our rubber sheet has a thickness range from 1mm to 50mm. The width can be in 36'',1m, 1.2m, 48", 1.4m, 1.5m, 60'' or cutting in other width according to your requirement. It can also be in continuous ...
  • Silicone Rubber SheetOur silicone rubber sheet is available in white, translucent, red oxide and black.
    The specifications of most standard silicone sheet we produce are as shown below:
    Density: 1.25 g/cm3
  • Rubber Sheet rubber has properties similar to natural rubber. Our rubber sheet has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.
  • Neoprene Rubber Sheet The thickness is from 0.8mm to 50mm and the width is 0.5m to 2m, any length. The finish of the neoprene rubber sheet can be smooth or both side fabrics impress on finish. Insertion can be common cloth ...