NBR Rubber Sheet

Home » Products » Rubber Sheet » NBR Rubber Sheet
NBR Rubber Sheet

Description
Our NBR rubber sheets offer good expansion resistance in the solvent, can working in the lubrication oil, transformer oil, gasoline and any other oil medium at the temperature of -30 to 80C. The thickness is from 0.8mm to 50mm and the width is 0.5m to 2m, any length. The finish of the NBR rubber sheet can be smooth or both side fabrics impress on finish. Insertion can be common cloth insertion or nylon fabric insertion. Colors available are black, red, white, blue, green, etc.

Applications
The NBR rubber sheet is used for gasket making, matting, and any oil industrial application.

Typical Physical Properties and Values
Hardness, Shore A: +/-5: 65
Specific Gravity (DENSITY): 1.5g/cm3
Tensile Strength: 4mpa
Elongation Break: 250%
Compression Set Maximum: 20%
Heat Aging: (70 Cx72hours)
Tensile Strength Change: 20%
Elongation Break Change: 25%
Hardness Change: 15%

We can produce other specifications per your request.

We is a specialized NBR rubber sheet manufacturer and supplier based in China. Our primary products include silicone rubber sheet, rubber sheet, Viton rubber sheet, rubber extrusion, PVC edge trim seal, and coextrusion door seal rubber extrusion. We welcome you to visit our page of NBR (Nitrile) rubber sheet.

Feedback Form
Other Products
  • Viton Rubber Sheet Viton rubber sheet can provide extraordinary levels of resistance to chemicals, oil and heat. The highest temperature Viton can resistant is up to 300 C. The thickness is from 0.8mm to 50mm ...
  • Rubber Sheet Our rubber sheet has a thickness range from 1mm to 50mm. The width can be in 36'',1m, 1.2m, 48", 1.4m, 1.5m, 60'' or cutting in other width according to your requirement. It can also be in continuous ...
  • Silicone Rubber SheetOur silicone rubber sheet is available in white, translucent, red oxide and black.
    The specifications of most standard silicone sheet we produce are as shown below:
    Density: 1.25 g/cm3
  • Rubber Sheet rubber has properties similar to natural rubber. Our rubber sheet has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.